514 {}The log file command line option (/G) must have a valid filename as an argument.
515 {^}The Setup table file version is incompatible with this version of Setup.
516 {}The Network Log file command line option (/X) must have a valid filename, including its full path, as an argument.
517 Microsoft Corporation
518 Setup completed successfully
519 Setup terminated by user
520 Setup failed with a command line parsing error
521 Setup failed with a copy disincentive error
522 Setup failed with an external error
523 Setup failed with an internal error
524 Setup failed with an out-of-memory error
525 Setup failed with an unspecified error while partially installed
526 Setup failed on system restart
527 Setup failed with an unspecified error
528 %W{}Setup was unable to restart Windows. There is probably another application still running, or you do not have system authorization to shut down Windows.
529 %W{#}This version of Setup requires Microsoft Windows 95 or Microsoft Windows NT 3.51 or later.
530 {O>}This is an invalid command line option:\n%1
531 Setup - Usage{O*^}Usage:\nsetup [/A] [/G filename] [/Q[0|1|T]] [/R] [/U[A]] [/X filename] [/Y]\n\n/A Administrator mode\n/G filename Generate logfile of installation activity\n/Q[0|1|T] Quiet install mode (0 shows exit, 1 hides exit, T hides all display)\n/QN[1|T] Quiet install mode with reboot suppressed.\n/R Reinstall the application\n/U[A] Uninstall the application but leave shared components (/UA to remove all)\n/X filename Set Network Log Location for tracking install instances\n/Y Install without copying files
532 %W{Oc}You need to restart Windows for Setup to install TrueType fonts.\n\nAfter you have restarted Windows, run Setup again.
533 {}Setup was unable to create a unique .FOT name for the .TTF file.
534 %W{}There is no network available.
535 %1{}Setup has found a network error.\n%2
537 %W{}The PATH statement in your Autoexec.bat file is too long for Setup to modify.\n\nBefore your new software will run correctly, you must edit the Autoexec.bat file manually to add the following folder to your PATH statement:\n\n%1\n
538 {}Initializing failed
539 %W{}Setup does not support being run in this mode.
540 {O>}This is an invalid combination of command line options.
543 %A{}%1 was unable to register itself in the system registry.
544 {}Setup is unable to open the data file '%1'; run Setup again from where you originally ran it.
545 %A{Rc}Setup cannot register %1 in the system registry because an older version is in use. Close all applications and try again.
546 %A{aRi}Setup cannot remove %1 from the system registry because it is in use. Close all applications and try again.
560 %W{Oc!}Setup was unable to determine a valid default destination folder. Specify a different destination folder.
576 There is not enough space on your disk to install this option.
577 There is not enough space on your disk to complete the installation with the specified options.
592 %W{yN^}Are you sure you want to restore the previous version of Internet Explorer?
594 %A{Yn^}The destination folder:\n\n'%1'\n\ndoes not exist. Do you want to create it?
608 {}The Setup program has become corrupted. Run Setup again from where you originally ran it.
624 Shared Proofing Tools{Oc^}Setup cannot update the proofing tools in the shared location because the lex formats are incompatible.
626 Shared Proofing Tools{Oc^}The shared location is missing a proofing tools file, so the proofing tools will be installed locally.
641 Confirm Component Removal{Yn}You have chosen to remove %1 component. Are you sure you want to remove it?
642 Confirm Component Removal{Yn}You have chosen to remove %1 components. Are you sure you want to remove them?
644 No Changes{}You have not specified any changes to your current installation. Select the items you want installed and clear the items you want removed, or click Cancel to not make any changes.
645 %1{^}This component is an essential part of the application. If it is not installed, the application will not run properly.
646 Installed
656 %1{Rc}Cannot read drive %2:.\n\nMake sure that the drive door is closed and that the disk is properly formatted without errors.
657 %1{Rc}Cannot select drive %2:.
658 %A{}The specified folder name:\n\n'%1'\n\ncontains invalid characters. Enter a different folder name.
659 %A{}The specified folder:\n\n'%1'\n\nis in the Setup source files folder. Enter a different folder name.
660 %A{}The specified folder:\n\n'%1'\n\nis invalid, incomplete, too long, or write-protected. Enter a full path with the drive letter; for example, 'C:\APPS'.
661 %A{oC!}Setup has found an existing version of %2 in the destination folder:\n\n'%1'\n\nClick OK to reinstall or add options to the existing version. To keep the existing version without changes, click Cancel and specify a different folder.
662 %A{oC!}Setup has found an older version of %2 in the destination folder:\n\n'%1'\n\nTo replace the existing files with the new version, click OK. To keep the existing version, click Cancel and specify a different folder.
663 %A{}The specified folder:\n\n'%1'\n\ncontains one or more files. When using the administrator (/a) option, you must install to an empty folder to avoid replacing any files required by network users.
664 %A{}The specified volume does not support long file names. You must select a destination that supports long file names, or force the use of short file names. To force short file names, exit now and restart Setup using the /F command line option.
665 %A{}The specified shared files folder:\n\n'%1'\n\nis the administrator (/a) installation folder. Please specify a different folder.
688 {}A command line option has been used, which is valid only in Maintenance mode.
689 {}Setup cannot update an installation interactively in Quiet mode.
690 {}Setup cannot complete an Administrator installation from this copy of Setup that was previously installed. Run Setup from an original installation disk.
720 OK
721 Cancel
722 {}Setup was unable to complete initialization.
723 {}Setup was unable to read configuration information from the first section of the setup file: %1.
724 Setup - Usage{*^}%1
725 {>}The Table File command line option (/T) must include a valid filename.
726 {>}The User Name command line option (/N) must include a name of no more than 52 characters in double quotes.
729 {>}The Organization Name command line option (/O) must include a name of no more than 52 characters in double quotes.
730 {>}There is an unmatched quote in the command line. A command line option is missing one or more quotes.
731 Microsoft Setup Tool\nVersion %s
732 {}Setup was not completed successfully.
735 %W{^}A name is required.
736 %W{^}An organization name is required.
737 E&xit Setup
742 {>}The Source Folder command line option (/S) must include a valid source folder.
743 {>}The Quiet Level command line option (/Q) must include a valid level of 0, 1, or T. N may be appended for levels 1 and T.
744 {}The Registration Wizard failed to start\n\n Pathname: %1
754 %A{Oc*}Setup is ready to launch the Online Registration Wizard.Once registration is finished, be sure to return to Setup to complete the installation of your new software.
755 %A{}Invalid program group name.
756 Version Incompatibility{Ync^}Setup has found an existing %1 that is older and incompatible with the version Setup is about to install. If it is replaced, the following language(s) will be lost: \n\n%2\n\nDo you want Setup to replace the existing %1?\n
758 Version Incompatibility{}Setup has found an existing %1 that is newer and incompatible with the version Setup was going to install. Contact your local Microsoft office to obtain newer copies of these dictionaries: \n\n%2\n\n
759 %A{>}The CD Key command line option (/K) must include the identification number from your CD sticker in double quotes.
760 %A{>}The COA command line option (/C) must include the Product ID from your Certificate of Authenticity in double quotes.
